Brick and tile series practical patent technology
来自: 广东满堂古建砖瓦厂 浏览次数:560 2019-01-24From : Guangdong Mantang Ancient Brick & Tile FactoryViews : 560
I. Patented antifreeze technology for brick making
Use national invention patent technology-"brick and tile antifreeze patent technology". Can make brick and tile factory production all year round . Do not add machinery and equipment, to ensure that there is no frost damage within -15 ℃, the average increase cost is about 45 yuan per 10,000 bricks, material costs to buy nearby, easy to use. Technology transfer fee: 19,800 yuan.
2. Quick drying technology for soil and adobe
Using "quick drying technology of soil and adobe" can directly use river mud and mountain soil with excessive moisture content to make bricks and tiles. At the same time, the life cycle of the drying plant is increased, the site utilization rate is increased by up to 150%, no equipment investment is needed, and the average increase cost is about 40 yuan per 10,000 standard bricks.
Third, high-strength elastic wheel kiln repair technology
The "high-strength elastic wheel kiln repair technology" can be used to repair any point kiln or surface of a wheel kiln or tunnel kiln without cease-fire. Generally, the repaired surface will not fall off, crack, leak, and save energy within three years. Brick and tile enterprises with an annual output of 40 million standard bricks can save 200-260 tons of raw coal annually. No mechanical equipment is needed, and the required materials are easily available in the market. The repair material cost of each wheel kiln is about 40--60 yuan. One-time technology transfer fee: 13,800 yuan. (Suitable for repairing old wheel kiln with severe air leakage).
Fourth, the anti-freezing technology of finished bricks
The use of "finished brick antifreeze technology" can make finished bricks meet or exceed the new national standards. Especially in the area north of the Yellow River, it can achieve a certain thermal insulation performance without frost cracking and falling corners. Every 10,000 standard bricks need to increase the cost by 3-5 yuan, without adding any mechanical equipment. A one-time technology transfer fee of 15,800 yuan.
V. Elimination of frost on finished bricks
The use of "finished bricks to eliminate frosting technology" can fundamentally solve the technical problem of frosting of finished bricks, which is suitable for various types of clay, shale, coal gangue and other brick-making raw materials. The traditional solution is to spray the finished brick with water when it exits the kiln. This can only solve the temporary sales need, but not the actual problem of the user. The use of "finished bricks to eliminate frosting technology" does not need to add any mechanical equipment, and only costs 8 yuan per 10,000 standard bricks, which is easy to use. The technology transfer fee is 16,800 yuan.
6. Eliminate the phenomenon of limestone burst in finished bricks
Clay, shale, coal gangue and other brick raw materials are mixed with calcium oxide-limestone to varying degrees. The finished bricks will burst after being used for a period of time and the sales volume will be greatly affected. At present, it only needs to increase the cost of 5-8 yuan for every 10,000 standard bricks, which can completely solve the limestone burst phenomenon, and the one-time technology transfer fee is 18,800 yuan.
Seven, self-adjusting the color of the finished brick
In the decades of production and sales of standard red bricks, the appearance and color of standard red bricks have not been valued by people. In the new century, people's living standards have improved, and more and more attention has been paid to the appearance and color requirements of finished bricks used in house repairs. The color of the finished brick is good to the local people's aesthetic viewpoint, otherwise the product will be unsaleable and the benefits will be lost.
The use of "self-adjusting" finished brick color technology can produce finished bricks with beautiful appearance, bright colors, and suitable for local aesthetics. The material cost is about 10 yuan per 10,000 standard bricks. Easy to use, materials are purchased nearby. One-time technology transfer fee: 15800 yuan.
Production technology of clay insulation brick
At present, most of China's clay products are not thermally insulated. At present, a large number of clay thermal insulation products are required on the market, but the existing production technology of clay manufacturing enterprises is unable to produce qualified clay thermal insulation products. In order to meet the market demand, some clay manufacturing enterprises use a large amount of wood chips or other plants to crush the stalks and add them to the production raw materials to produce thermal clay products, but their product quality and cost are difficult to guarantee and control. Clay raw materials with poor plasticity cannot produce clay thermal insulation bricks. The average cost of clay insulation bricks per 10,000 standard bricks is about 9 yuan, and no equipment investment is required. One-time transfer fee for production technology of clay insulation brick: 19,800 yuan.
Nine, inferior soil brick and tile technology
The use of "inferior earth-made brick and tile technology" can make the originally poor plasticity of the Yellow River sandy soil, plateau mountain soil, coal ash, coal slag, coal powder and other brick and tile materials in the production process to increase molding plasticity. Make the Yellow River sandy soil, plateau mountain soil, coal ash, coal slag, coal powder and other brick-making materials to meet the plastic standards required for brick and tile. Do not change the original production method and production process of the production enterprise. The materials are easy to purchase, (can be supplied for a long time), and the average cost per 10,000 standard bricks is about 6 yuan (including freight). The one-time transfer fee for this technology: 19,800 yuan. For small batch tests, the cost of 100,000 standard brick test production materials: 4,000 yuan.
Ten, brick and clay soil aging technology
Using "brick and tile soil aging technology" can adjust the plasticity index of inferior soils such as deep clay and mountain soil to the standard for high-quality brick and tile soil, without the need to increase machinery and equipment, long-term storage and aging, and purchase raw materials nearby. The material cost is 15 yuan per 10,000 standard bricks, which is easy to operate. One-time technology transfer fee: 22,800 yuan.
11. Anti-cracking technology for brick making
The use of "brick and tile cracking prevention technology" can reduce the plasticity of any kind of clay. After use, it does not affect the quality of the finished bricks. It does not need to cover the straw bales or straw curtains immediately after loading. about. (This technique is applicable to the semi-finished brick and brick artificial drying) One-time technology transfer fee: 18,000 yuan.
Twelve, non-plastic raw materials brick and tile technology
The use of "non-plastic raw material brick and tile technology" can make the original non-plastic yellow river sandy soil, plateau mountain soil, fly ash, coal slag, coal gangue and other brick and tile materials in the production process to increase molding plasticity. Make the non-plastic yellow river sandy soil, plateau mountain soil, fly ash, coal slag, coal gangue and other brick-making materials to reach the plasticity standards required for brick making. Do not change the original production method and production process of the production enterprise. The materials are easy to buy, and the average cost per 10,000 standard bricks is about 15 yuan. One-time technology transfer fee: 21,800 yuan. Invited to the site to guide production needs to pay in advance the test costs (material costs, road expenses, etc.) RMB: 5000 yuan.
- Boluo floor tiles custom-quality Huizhou floor tile manufacturers in Huizhou
- Which brick is good in Yongzhou_Recommended qualified Huizhou brick and tile factory
- How much is Zhongkai's ancient building blue bricks?
- Antique green tile price-practical Huizhou antique green tile for sale in Huizhou
- Maoming green brick manufacturers-affordable Huizhou green bricks in ancient buildings
- Air pollutant emission standards for brick and tile industry
- Guangdong: Full implementation of star green building standards
- How much pressure is the "environmental protection" of the brick and tile industry? Understand after reading
- Italy promotes energy efficiency in buildings and uses special bricks